Four repairs for one leaking sewer joint #shorts
Four repairs for one leaking sewer joint: an internal joint seal, a mechanical sleeve, a resin patch and a full-length liner that is not a repair.
Application Overview
English transcript
From the subtitle track delivered with the video. Refer to the video and product documentation for technical details.
A sectional point repair is not one product. It is four different answers to the same leak. Route one is an internal joint seal. Two stainless bands press a rubber sleeve across the joint. The rubber takes the water, and the steel holds the rubber. Inside, the water pressure pushes the rubber onto the wall. Outside, groundwater pushes in from behind. The stainless bands keep the rubber compressed against the wall. Route two is a mechanical repair sleeve. A rolled stainless shell in a rubber jacket rides in on a packer. It unrolls to the wall, and a ratchet locks it open. No resin, and no cure time. Nine sizes, from DN150 to DN600. The full explainer is on our channel.
Resources
Product videos
Explainer videos and short demonstrations from Reliance’s official YouTube channels. Browse every published video by topic and follow each one to its reviewed watch page or official YouTube source.
